An innovative approach for integrated airline network and aircraft family optimization

The determination of optimal aerial transport networks and their associated flight frequencies is crucial for the strategic planning of airlines, as well as for carrying out market research, to establish target markets, and for aircraft and crew rostering. In addition, optimum airplane types for the selected networks are crucial to improve revenue and to provide reduced operating costs. The present study proposes an innovative approach to determine the optimal aerial transport network simultaneously with the determination of the optimum fleet for that network, composed of three types of airplanes (network and vehicle integrated design). The network profit is maximized. The passenger’s demands between the airports are determined via a gravitational model. An embedded linear programming solution is responsible for obtaining potential optimal network configurations. The optimum fleet combination is determined from a database of candidate aircraft designs via genetic algorithm. A truly realistic airplane representation is made possible thanks to accurate surrogate models for engine and aerodynamics is adopted. An accurate engine deck encompassing a compression map and an innovative engine weight calculation besides an aerodynamical artificial neural network module enable a high degree of accuracy for the mission analysis. The proposed methodology is applied to obtain the optimum network comprised of twenty main Brazilian airports and corresponding fleet.     

基于粒子群算法的多波位高度估计方法

为解决雷达斜视模式下对目标区域的高度估计问题,提出了一种基于粒子群算法的多波位高度估计方法。利用粒子群优化算法建立约束条件和目标函数,通过多次迭代使目标函数趋于一个最优值,同时得到高度的最优解。利用粒子群优化算法求解多波位测高方程组可减小方程组近似处理误差。此外,利用粒子群优化算法可随时更改波位数目,增强了该测高方法使用的灵活性,有效提高了高度估计精度。通过理论仿真和实测数据仿真分析,验证了粒子群优化算法在求解多波位测高方程组时的有效性。结果表明:该方法具有较高的高度估计精度。     

Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.     

分析插值误差和斜率的轨迹优化网格细化方法

提出一种基于插值误差和斜率分析的轨迹优化自适应网格细化方法，包括节点插入算法和节点删除算法。节点插入算法分析各个离散节点的控制变量的插值误差。若插值误差较大，则在该节点周围增加节点细化网格；否则，不进行细化。节点删除算法分析各个离散节点处的控制变量斜率。若某个节点的左斜率和右斜率都为零，那么删除该节点；否则，保留该节点。采用三个典型的轨迹优化算例验证了所提出的方法的有效性和特色，并且与其它几种网格细化方法进行了对比。仿真结果表明，本文方法生成的网格规模较小，需要的网格迭代次数较少，能够快速、高精度求解非光滑轨迹优化问题。     

A novel framework for liquid propellant engine’s cooling system design by sensitivity analysis based on RSM and multi-objective optimization using PSO

One of the challenges of combustion chamber and nozzle design in a Liquid Propellant Engine (LPE) is to predict the behavior and performance of the cooling system. Therefore, while designing, the optimization of the cooling system is always of great importance. This paper presents the multi-objective optimization of the LPE’s cooling system. To this end, a novel framework has been developed, resulting from the application of the Response Surface Method (RSM) and the correlation coefficients matrix, sensitivity analysis and the The Particle Swarm Optimization (PSO). based on this method, the input variables, constraints, objective functions, and their surfaces were identified. In terms of multi-optimization algorithms, RSM and PSO are utilized to get global optimum. In conclusion, the methodology capability is to optimize the LPE’s cooling system, 6 percentage increase in total heat transfer and 7 bar decrease cooling system pressure loss, which resulted in a 1.2-seconds increase in the specific impulse of the engine.     

基于伴随方法的单级低速压气机气动设计优化

采用梯度方法对某型4.5级压气机最后级进行气动设计优化研究，梯度由连续伴随方法计算确定，多排伴随方程采用伴随掺混面模型进行数值求解。首先，采用基于经验修正的初步设计方法设计带进口导叶的4.5级低速、低压缩比压气机的原始气动外形。之后，在压气机近失速工况对最后级静子叶片进行伴随气动设计优化，通过优化叶型和安装角降低流动损失，目标函数定义为加权求和形式的熵增和流量偏差，优化中对流量进行约束。最后，开展基于伴随方法的多工况气动设计优化研究，改善两个不同转速条件下最后级的气动性能。优化结果表明，基于伴随方法的多排气动设计优化可以通过改变叶片气动外形提升多排全工况气动性能。     

100 kWe级空间快堆核电源系统仿真平台开发与应用

空间核反应堆电源作为一种具有竞争力的空间电源方案,正逐渐受到关注及应用。本文针对一个100 kWe级锂冷快堆耦合布雷顿循环的空间堆核动力系统方案,修改了RELAP5程序中的物性程序、换热模型,程序中的中子动力学模块使用蒙特卡洛方法计算快堆物理参数与堆芯控制调节参数,由此集成并建立一个空间快堆核动力系统综合仿真平台,应用该平台对100 kWe级空间堆核动力系统进行了稳态模拟与事故分析。结果表明:在瞬态发生后系统各参数变化符合预期,验证了各部件及控制系统的功能性及有效性;同时,还初步进行了仿真平台用于100 kWe级空间反应堆核动力系统设备的设计优化的实践,为空间快堆设计与安全分析提供了技术储备。     

数字全息测量超高速撞击碎片云实验研究

在中国空气动力研究与发展中心(CARDC)超高速碰撞中心(HIRC)7.6 mm超高速碰撞设备的基础上，搭建纳秒级脉冲激光数字全息系统。提出滤波片和衰减片组合布置，减弱超高速碰撞等离子体自发光、提高信噪比的方法。实验获得了2.25 mm铝球弹丸以4.0 km/s的速度撞击0.5 mm厚铝板形成碎片云的全息图。采用小波变换算法对碎片云全息图进行重建，得到超高速撞击碎片云的三维结构和碎片大小。碎片云的轮廓呈椭球型，分为碎片云的前端、核心和外壳，碎片主要分布在弹丸破碎形成的碎片云核心，存在大碎片，且分布较集中，对后板的损伤也严重     

航天铝合金深腔零件整体成形预制坯优化设计

提出航天铝合金深腔零件整体成形方法,开展预制坯优化设计。对比分析直筒和变径筒两种预制筒坯结构变形规律,数值模拟研究了底部圆角对开口球形件液压成形的影响规律。以直径D=450 mm的球形整体零件为验证对象,进行底部圆角r=60 mm的变径筒形件的液压成形试验验证。结果表明:直筒坯液压成形时,赤道位置发生破裂;变径筒坯液压成形时,当胀形压力为16 MPa即发生贴模;液压成形时,筒端口自适应补料,所以上半球的壁厚分布均匀;随着底部圆角越大,筒底部减薄越小,筒壁厚越均匀;当底部圆角为r=60 mm时,开口球壳赤道位置壁厚减薄最严重,减薄率为11.1%,球底部减薄率为9.8%,开口球壳上半球壁厚差为0.17 mm,下半球壁厚差为0.43 mm。